What are the four key points in the workflow of commercial flake ice machine

　Commercial flake ice machine is a kind of refrigeration machinery equipment which produces water after cooling water by refrigerant in refrigeration system through transpiration device. According to the different principles of the transpirer and the generation process, the shape of the generated ice is also different. People generally divide theice maker  into a pellet ice machine, a flake ice machine, a plate ice machine, a tube ice machine , a shell ice machine, etc. . No matter what kind of ice, it is determined by its characteristics. Here we introduce four important points in the ice making process of commercial flake ice machines:

Commercial ice flake mechanism ice principle

　　Water enters the water separation tray from the inlet of the flake ice machine evaporator, and the water is evenly sprayed on the inner wall of the evaporator through the sprinkler pipe to form a water film; the water film exchanges heat with the refrigerant in the evaporator flow channel, and the temperature is agile Down, a thin layer of ice was formed on the inner wall of the transpirator. Under the squeeze of the ice knife, it shattered into pieces of ice, and fell into the ice storage from the ice outlet. Part of the unfrozen water returns to the cold water tank from the return water port through the water receiving tray, and passes through the cold water circulation pump.

　　Commercial flake ice mechanism ice cycle

　　After the supplementary water valve, the water automatically enters a water storage tank, and then the water is pumped through the flow control valve to the diverter head, where the water is evenly sprayed onto the surface of the ice maker, and flows through the ice maker like a water curtain On the wall surface, the water is cooled to the freezing point, and the water that has not been frozen by transpiration will flow into the storage tank through the porous tank and restart the circulation operation.

　　Commercial ice flake machine ice picking cycle

　　When the ice reaches the required thickness (normally, the thickness of the ice is 1.5-2.2MM), the hot gas discharged from the compressor is reintroduced back into the wall of the ice maker to replace the low-temperature liquid refrigerant. In this way, a film of water is formed between the ice and the transpiration tube wall. This film of water will play a lubricating effect when the ice falls freely into the groove below by the effect of gravity. The water that occurs during the ice mining cycle will return to the water storage tank through the porous tank, which also prevents wet ice from being discharged by the machine.

　　Commercial Flake Ice Refrigerator Condenser

　　There are air-cooled, water-c